Nové strojes plnou zárukou
STL-6/STL-6M
_0x280.jpg)
POPTAT DOSTUPNOST
V případě zájmu Vás budeme kontaktovat s cenovou nabídkou a možnou dobou dodání
Specification
| MACHINE MODEL | STL-6 | STL-6M |
|---|---|---|
| Capacity | ||
| Max. Swing over bed | Ø495 mm | |
| Max. Swing over saddle | Ø320 mm | |
| Max.Turning diameter | Ø320 mm | Ø250 mm |
| Max. Working Length | 300/600 mm | |
| Distance between centers | 320/620 mm | |
| Spindle | ||
| Spindle nose type | A2-6 | |
| Max. Spindle speed | 3800 rpm | |
| Front bearing I.D of spindle | Ø100 mm | |
| Spindle bore | Ø62 mm | |
| Max. Bar capacity | Ø52 mm | |
| Chuck size | 8" Jaws | |
| Axis Feed | ||
| X axis travel | 160+20 mm | 140+20 mm |
| Z axis travel | 300/600 mm | 600/600 mm |
| Rapid feed- X/Z axis | 24/24 m/min | |
| Cutting feed rate | 1-1240 mm/min | |
| Dia. of B.S (X/Z axis) | X: Ø32 Z:Ø40 | |
| Turret | ||
| Type | Hydraulic (opt. Servo) | Power VDI 30 |
| Number of tool stations | 10 pcs | 12 pcs |
| Tool shank size | 25 | 20 |
| Max. Boring bar Dia. | Ø32 mm | Ø32 mm |
| Tail Stock | ||
| Tailstock Travel | 150 mm | |
| Quill Dia. | Ø70 mm | |
| Quill Travel | 90 mm | |
| Taper of Center | MT4 | |
| Tailstock orientation | Manual | |
| Motor | ||
| Main spindle motor power | 11/15 Kw | |
| Feed motor | 3.0/3.0 Kw | |
| Power turret motor | Nil | M: 3.7/5.5kw |
| Lubrication Pump | 70 W | |
| Hydraulic oil pump | 3 HP | |
| Coolant pump | 0.75 Kw | |
| Chip conveyor | 0.2 Kw | |
| Power requirement | 25 KVA | 30 KVA |
| Utility | ||
| Hydraulic tank capacity | 42 L | |
| Coolant tank | 100 L | |
| Lubrication tank | 2 L | |
| Air source | 6 kg/cm2 | |
* The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performance of the machine. Specifications are subject to change without notice.
.jpg){kind=link}